Can the construction continue after the corner protection net product is deformed?

Many customers responded that the corner protection net products had some deformation after receiving them. The 90-degree angle became an obtuse angle, and some became an acute angle. So, are the products deformed after transportation? Can they still be used after deformation? Here, we explain it in detail for you:

First: The reason why the product is deformed is because the quality of the product is not good. Good quality products generally do not deform. Deformed products generally do not need to be restored to their original state manually. They are likely to deform or break under the action of external forces.

Products with less than 90 degrees can be pressed directly at the corner of the wall, and then mortar is applied. In this way, the construction of the product is the same as that of good products. If it is greater than 90 degrees, don't try to bend it back by hand. If some parts are bent back in winter, some parts cannot be bent back, which is even more detrimental to construction. At this time, fix the mesh cloth on one side first, then adjust the straightness of the product, and then apply mortar on the other side. If it is too stretched, return it. If the angle is too large, it is the manufacturer's fault. Transportation can only cause partial deformation, but not a large deformation.